Modular LED Flood Light 160W 200W 240W — TF2C-4, IP68, Dock & Shipyard Lighting
The TF2C-4 deploys 4 LED engine modules for an output of 160W, 200W, or 240W, producing 17,600 to 24,000 lumens. At this power level, the TF2C-4 enters the specification range for demanding outdoor industrial area lighting: container terminal aprons, shipyard working decks, heavy manufacturing yard perimeters, and large open-air storage areas where consistent, high-uniformity illumination is required across wide coverage zones from 10–15 m mounting heights.
The 200W configuration is particularly well-matched as a direct replacement for 600W metal halide systems, while the 240W configuration covers applications previously requiring 750W HID lamps — both at a fraction of the operating cost and with none of the re-lamping downtime.
TF2C-4 Specifications
| Model | Driving Current (mA) | Power (W) | Efficacy (lm/W) | Flux (lm) | PF | Efficiency | Beam Angles | LED | CRI |
|---|---|---|---|---|---|---|---|---|---|
| FL-160W/200W/240W-TF2C-4 | 700 | 160 | 110 ± 5 | 17,600 ± 800 | 0.95 | 91% | 12° / 25° / 40° / 60° / 110° / 110°×40° | Lumileds LUXEON T | > Ra70 |
| 860 | 200 | 105 ± 5 | 21,000 ± 1,000 | ||||||
| 1050 | 240 | 100 ± 5 | 24,000 ± 1,200 |
Packaging & Dimensions
- Product size: 360 × 260 × 335 mm
- Packing size: 475 × 430 × 210 mm
- Net weight: 6.7 kg
- Gross weight: 8.0 kg
General Specifications
- Input voltage: AC 100–240V, 50Hz, THD < 20%
- CCT: 3000K / 4000K / 5000K / 5700K
- Surge protection: 10KV
- Housing: Die-cast aluminum alloy; black, white, grey, blue
- Driver: Inventronics / MOSO (Meanwell available on request)
- Bracket adjustment: ±360°
- Ingress protection: IP68 (LED module), IP65/IP66 (housing)
- Impact resistance: IK10
- Operating temperature: -40°C to +50°C
- Lifespan: L70 ≥ 50,000 hours
- Warranty: 5 years
Key Features
- IP68 double-seal LED module: Each of the four modules is independently sealed with a screw-free double silicon-rubber ring system, providing complete isolation from salt fog, chemical vapour, and water ingress — essential for dock and marine environments.
- Pluggable module, tool-free replacement: Individual modules are field-replaceable by hand without removing the fixture from its mounting — critical at dock and shipyard installations where fixture access involves elevated working platforms.
- Honeycomb air convection cooling: Four-module configuration maximises the convection surface area, dissipating heat efficiently and sustaining rated lumen output across the full operating temperature range of -40°C to +50°C.
- 10KV surge protection: Industrial-grade surge protection guards against electrical transients common in port, marine, and heavy manufacturing electrical environments.
- 600W–750W metal halide replacement: The 200W and 240W configurations replace 600W and 750W HID systems respectively, eliminating ballast failures and lamp replacement cycles.
Typical Applications
The 160W–240W output range is specified for high-demand outdoor industrial and port lighting where corrosion resistance and low maintenance are operationally critical:
- Container terminal aprons and port working areas
- Shipyard building slips, dry docks, and repair yards
- Coastal industrial perimeter and yard lighting subject to salt-fog exposure
- Chemical plant outdoor working areas and tank farm perimeters
- Large logistics yard and freight terminal area lighting
- Heavy manufacturing outdoor assembly and storage areas
For the 120W–180W range suited to factory and warehouse perimeters, see the TF2C-3. For higher output above 240W for large industrial yards and mining sites, see the TF2C-5 (200W–300W).
Lighting Distribution
Dimensional Drawing
Installation
Maintenance Guide — Driver & Electrical Parts
Maintenance Guide — LED Module Replacement
Connectors Operation Guide
Reviews
There are no reviews yet.