Modular LED Flood Light 120W 150W 180W — TF2C-3, IP68, Factory & Warehouse Lighting
The TF2C-3 uses 3 LED engine modules to deliver 120W, 150W, or 180W, with a lumen output of 13,200 to 18,000 lm. This configuration steps into genuine industrial lighting territory — producing sufficient output for large single-bay factories, logistics warehouse exteriors, multi-level car park ramps, and mid-size storage yard floodlighting from mounting heights of 8–12 m.
The 150W output point is particularly well-specified as a direct replacement for 400W metal halide luminaires, delivering comparable lumen output at less than 40% of the energy consumption, while the pluggable IP68 module design eliminates the recurring ballast and lamp replacement costs that make metal halide systems expensive to operate over a 5–10 year cycle.
TF2C-3 Specifications
| Model | Driving Current (mA) | Power (W) | Efficacy (lm/W) | Flux (lm) | PF | Efficiency | Beam Angles | LED | CRI |
|---|---|---|---|---|---|---|---|---|---|
| FL-120W/150W/180W-TF2C-3 | 700 | 120 | 110 ± 5 | 13,200 ± 600 | 0.95 | 91% | 12° / 25° / 40° / 60° / 110° / 110°×40° | Lumileds LUXEON T | > Ra70 |
| 860 | 150 | 105 ± 5 | 15,750 ± 750 | ||||||
| 1050 | 180 | 100 ± 5 | 18,000 ± 900 |
Packaging & Dimensions
- Product size: 360 × 260 × 255 mm
- Packing size: 430 × 335 × 330 mm
- Net weight: 5.6 kg
- Gross weight: 6.6 kg
General Specifications
- Input voltage: AC 100–240V, 50Hz, THD < 20%
- CCT: 3000K / 4000K / 5000K / 5700K
- Surge protection: 10KV
- Housing: Die-cast aluminum alloy; black, white, grey, blue
- Driver: Inventronics / MOSO (Meanwell available on request)
- Bracket adjustment: ±360°
- Ingress protection: IP68 (LED module), IP65/IP66 (housing)
- Impact resistance: IK10
- Operating temperature: -40°C to +50°C
- Lifespan: L70 ≥ 50,000 hours
- Warranty: 5 years
Key Features
- IP68 double-seal LED module: Screw-free double silicon-rubber ring sealing isolates all three LED modules from moisture, dust, and chemical vapour — critical for factory and processing environments with airborne contaminants.
- Pluggable module, tool-free replacement: Each of the three modules is independently removable and replaceable by hand, enabling module-level servicing without fixture removal or specialist labour.
- Honeycomb air convection cooling: Three-module spacing maximises inter-module airflow, reducing LED junction temperature by approximately 20°C and maintaining lumen output over the full 50,000-hour rated lifespan.
- Lumileds LUXEON T flip-chip LEDs: Failure of a single LED chip does not affect adjacent chips, maintaining luminaire output continuity in critical operational environments.
- 400W metal halide replacement: The 150W configuration delivers comparable lumen output to a 400W metal halide system at less than 40% energy consumption, with zero re-lamping costs over a 50,000-hour service life.
Typical Applications
The 120W–180W range addresses the core of industrial and logistics outdoor lighting requirements:
- Factory exteriors and manufacturing facility perimeter lighting
- Logistics and distribution warehouse outdoor areas
- Storage yards and open-air inventory areas
- Multi-storey car park ramps and open decks
- Construction site area lighting
- Chemical plant perimeter lighting where IP68 corrosion resistance is specified
For lighter commercial and perimeter applications, see the TF2C-2 (80W–120W). For higher-output requirements above 180W, see the TF2C-4 (160W–240W).
Lighting Distribution
Dimensional Drawing
Installation
Maintenance Guide — Driver & Electrical Parts
Maintenance Guide — LED Module Replacement
Connectors Operation Guide
Reviews
There are no reviews yet.